I just upgraded to XCode 6.1
I started to create a Mac, Cocoa application.
In story board, i put a button on view controller, and tried to CTRL+DRAG it to the source code.
Problem is that it doesn't work, at least i have to see the blue line despite of where im going to drop it, but nothing happens at all and blue line doesnt appear and control stays put :-s
What am i doing wrong?
I received 3 text messages within 10 minutes from my cellular carrier as I was driving in my car with iTunes Radio streaming music. The first message said I used up 65% of my 1 GB plan. The next said 90%. The last said 100% and I would be charged $20 for going over.
I went into Settings > Celluar to find the culprit. It was indeed caused by the Music app, so I immediately switched off its cellular usage. It had used up 1 GB in 10 minutes (this was the first time I attempted music streaming while driving). It was most likely the iTunes Radio inside the Music app. I have zero music files in my collection, so the data usage couldn't have arisen from synching with iTunes.
In all the articles that I've read, they say iTunes Radio should only use 28 MB per hour - much less than what I just experienced. So what caused my meteoritic rise in data usage?
I'm a hoarder of contact info in Contacts.app. I always keep people's old contact info in Contacts.app entry so that, for example, their pic will show up in Mail.app on even old emails from them.
This leads to a lot of contact info building up, and I would like to reorder such contact info so that older ones are lower on the list. There doesn't seem to be an in-app way to do this, outside of manually putting everything in again in the order that you want them. That is particularly annoying because I'd like the newest contact info at the top and each time anyone changes anything I'd have to redo the order, and also it's not feasible to implement it over a large contact database, which I have.
So:
I have my screen saver set to display images from a folder in my ~/Pictures directory, and the "Shuffle slide order" box is checked. In Yosemite, I find that occasionally one or both of those settings will revert to the defaults; the "Source" menu will revert to "National Geographic", the "Shuffle slide order" box will be unchecked, or both.
Is there any reason these settings should be changing without my intervention? Is there any way I can monitor the settings (such as in a system log somewhere) to find out more about when this happens and why?
I have been having an issue with Mail.app.
After I create an account, even if i do define the password (whether it be via programmatically doing so using applescript OR manually), after I save my changes and close the "Preferences" frame for Mail in which the password can be changed, the password text box resets to be blank. NONE of the other properties change (the username, email, servers etc all are saved and do not reset to be blank text boxes). Here's a visual of the preferences frame with the blank password box issue:
As you can see, the password box is blank and even if i manually change the password and save changes, when I re-open the same preferences window after closing it, the password box is blank once again.
Here is a screenshot of the "Advanced" settings pane:
I have tried: -Deleting the com.apple.mail.plist file in ~/Library/Preferences -Deleting any trace of the account in the keychain -Restarting my computer
None of the above works. Any suggestions?
I'm running OS X Yosemite 10.10.1 on a mid 2012 13" MacBook Pro with the 2.5 GHz Intel Core i5 processor and 4GB of RAM. The hard drive (the 500 GB, regular HDD) was replaced about a year ago (close to 10 months after purchase) following a failure.
One morning, after waking up and waking the computer from sleep mode I encountered a strange amount of lag. It was bizarre because I was using the machine the night before without any problems, and now it was constantly stuttering while trying to play a movie on Netflix. Sound would play while the video froze every few seconds.
I restarted the computer, and the problem persisted. Moreover, it lags no matter what I do. iTunes can't make it through a song without freezing up 6-7 times, VLC constantly stutters too. The rainbow wheel pops up and spins any time I load a new page in Safari or Chrome, search with Spotlight, change pages in SimpleComic, change tabs in Finder, try and drag a file from one folder to another, etc.
It's constantly stuttering, freezing, and hanging any time I try and do just about anything. It usually only lasts 10-20 seconds, but it happens repeatedly. I've tried every remedy I know: restarting, repairing disk/permissions, turning off transparency, reinstalling OS X, restoring a Time Machine backup from before the problem, even clean reinstalling OS X. Nothing seems to work, there are no error messages, and I'm really annoyed.
I'd think it's a hardware problem, since a clean reinstall didn't work, but I ran the Apple Diagnostic Test and it found no problem. Moreover, everything works, just with crazy lag system-wide.
I'm wondering if anyone else has this problem, knows what it is, or if there's anything I can try that I haven't.
I've manually imported my Google Contacts into icloud.com (via a vCard file). Now I'd like to have these contacts available on my iPhone. My iCloud is property set up (Settings > Mail, Contacts, Calendars > iCloud). "Fetch New Data" is set to Push, "Contacts" switch is turned on.
Nevertheless the contacts don't sync. How can I analyze and fix this?
While my dock "auto-hide" is enabled when, in full-screen app, if I put the pointer to the very bottom, the dock won't show up. Unless, and this might be a bug, I move my mouse horizontally and it reaches and already opened app. Sounds weird but I don't understand
I have some image files that have a messed up extension. The files are of the following format: "filename." "filename.j" "filename.jp"
I need to find all these files which are in several folders and rename all of them to .jpg.
Anyone can show me a quick way to look for all these files? Also once I find them how can I rename all of them to .jpg in batch?
I tried normal quit, and it closes and immediately re-opens. I tried force quit, and it closes and immediately re-opens. I tried force quit from the Activity Monitor, and it closes and immediately re-opens. I tried to restart; this was not allowed because Chrome was open. I turned off using the power button, and turned back on. Chrome opened (despite not being in my login list, and despite me specifying NOT to open the windows that were previously open) I tried to delete Chrome; not allowed because it's open. I tried to force quit then immediately delete, but it opens so fast I can't do that. I used the terminal rm -rf method of deleting, and pages of text appeared, all saying essentially this but with different things between 'contents' and 'permission denied'. rm: /Applications/Google http://Chrome.app/Contents/_CodeSignature/CodeResources: Permission denied
Does anyone have a clue what's going on? I am out of ideas.
I buy 50.00$ gift cart Now I have 50.00$ balance in my Apple ID And now I can't buy gem from clash of clans I enter my password and press buy Then it's respected again and again What should I do Thanks for helping me
I have a MacBook Air (mid 2011) running OS 10.7.5. Last month I bought a new Time Capsule, and I would like to reformat/erase my old Time Capsule (about 5 years old) and give it to a friend. But right now, AirPort Utility cannot even find the old Time Capsule.
We wanted to test whether the old Time Capsule would work at all with my friend's ISP and Windows PC. We got them to talk to each other, but then we probably typed in something injudicious (an IP address, I think). Afterwards, we couldn't talk to the old Time Capsule with the PC, and now I can't talk to it with my MacBook either. When I use it directly as my wireless router, AirPort Utility no longer finds it - no Time Capsule icon at all, just a spinning wheel and a message saying it can't find anything but it will keep looking. (I never succeeded at locating the old Time Capsule when my new one was providing the wireless, even before we made things worse).
So the primary question is: what can I do to obtain any kind of access to my old Time Capsule - just enough to reformat it and start over? (There's no data on it that I need to care about.) Or can it be reformatted with some magic button press or paper clip insert on its own?
I'd like to install fonts in OSX manually without using Font Book, basically because I plan on develop a little fonts manager myself.
Dropping the font files into /Library/Fonts or ~/Library/Fonts actually works, except that the open applications don't refresh their fonts list.
I've noticed that if I drop a file in one of those folders and then open Font Book the other applications do refresh their lists, so I imagine there is a command to trigger the refresh event.
Does anybody know if there is a command that forces the open applications to refresh their fonts list? Alternatively, an open source fonts manager to study would be equally good.
Thanks!
I'd like to implement a mitmproxy for a single application on my mac. Pfctl doesn't natively have (from what I can see) support to set rules based on the application source/dest of the packets, but the Application Level Filter (ALF) does. Is there a way to combine the two? From what I can see, the only rules you can apply to ALF is a simple accept/deny flag, nothing more. I'd ideally like to apply a 'rdr' rule within alf
I have the following problem. When I connect to the server via ssh (client is PuTTY under Windows), I don't get UTF-8 locale. Here is what I see on MacOSX (Yosemite) after ssh connection:
$ locale
LANG=
LC_COLLATE="C"
LC_CTYPE="C"
LC_MESSAGES="C"
LC_MONETARY="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_ALL=
The thing is that I use the same settings for my Linux connections and on Linux I don't have these problems with locale. So, this might be a problem on the MacOSX side, not on the PuTTY's side.
Any ideas how to have UTF-8?
Will the HDMI port on late 2012 Mac Mini support dual monitors (landscape) when run to an HDMI matrix distributor for connection?
I've added some words that are not in the standard Apple dictionary in Pages 5.5 via the 'learn'/'ignore spelling' function.
Is there any way where I can see a comprehensive list of the words that I have added to the 'learn'/'ignore' list?
Thanks.
I try to write an Applescript that would sort playlists by album. That is, a playlist P might contain 20 tracks split on 4 albums (A1, A2…). Each album has 10 tracks, in other words, on this playlist, the albums on average only contain half of the tracks.
I have found a lot of examples where you can query iTunes for all tracks that belong to an album on the library level, typically something like this
set albumSongs to (every track of library playlist 1 whose album is currentAlbum)
while I want to do something like this
set albumSongs to (every track of playlist myPlaylist whose album is currentAlbum)
but compiling my example returns an error message Expected class name but found identifier. pointing at the track keyword in the line above.
I bought an iPad mini (Wifi only) and gave it to my nephew as a gift. He switched on the device and set it up with his apple ID. He did not set up (Find My iPad/iPhone) feature.
After a month of usage, he noticed the device is heating up when connected to the charger. Suddenly, the device display is off, and can not be charged.
When connected to a USB port on a mac, or PC, it does not get detected.
I tried to hold Power button+Home Button for 10 seconds then releasing the Home button, but it did not work.
I tried to put the device in Recovery Mode, DFU mode, but nothing worked. The device does not get detected by Windows or Mac.
I toke the device to the service center I bought it from (Not an Apple Store, we don't have Apple Stores in Saudi Arabia).
At the service center, they have a policy not to service any iOS device if it is locked using Find My iPhone feature from iCloud.
I told them that the feature was never turned on. They checked http://icloud.com/activationlock and entered the serial number, and found out that the device [Activation Lock : ON ]. So they asked me to login to icloud using the apple ID that was used to activate the lock and remove the device from [My Devices] in iCloud.
I logged in to icloud.com using my nephew's apple ID, but could not see the iPad in the list of devices.
I thought maybe the activation lock was done using another apple ID, so I tried mine, my brother's, all of the apple IDs I tried, none of them had this iPad listed among the devices in iCloud.
Now, I can not get service for the device because they think I stole the iPad. Although I have an invoice that proves the purchase.
I know that revealing the apple ID might be considered a breach of security, but if I could just get the first and last letter of the email of Apple ID used to lock the device, then we can reduce our efforts in this hassle.
My question is: how do I know the apple ID that is used to lock the iPad knowing only the serial number of the device?
Instead of using cmd+tab to switch between open apps, is there a way to create hotkeys for selecting the running instance of emacs/firefox/whatever? (Preferably opening them if they aren't running.)
I do not mind using Karabiner. Answers using built-in OS X functions preferred to third party software which again are preferred to those using software that costs anything.
I jailbroke my old iPod Touch 3rd Generation, with IOS 5.1.1, using the latest version of absynthe. It worked for several months, but then it randomly stopped. It went into safe mode, but the touch screen wouldn't work. It showed the lockscreen, but nothing worked at all, except for the physical buttons. The only way to reboot is to follow the same steps as DFU mode (Hold power button 3 sec, then home button AND power for 10, then just home for 8)... However, it always boots right back into Safe mode.
I had to restore, and once rejailbroken, it worked fine, until I installed SBsettings. Then it did the EXACT same thing, and I had to restore and re-jailbreak AGAIN! The other day, I finished installing ALL of my extensive list of tweaks, and got it to about where I wanted it, when lo and behold, it booted to safe mode again. I have spent so much time on this, and I do not want to do it again. Does anybody here have any knowledge on the topic? Is there a program I can run from my computer to manually control the device or kick it out of safe mode? Is there some other method of doing this? I am looking for any solution OTHER than restoring. I have done that several times.
Also, I know the problem isn't with my jailbreak. It worked for several months before, then one day stopped. Now, it has the problem within a day of rejailbreaking, OR instantly if I install SBsettings. I re-installed the jailbreak, and applied the new one as well, and that didn't work. I have given up, and don't want to go through the painful process of restoring, rejailbreaking, and re-installing all of those tweaks again.
Also, because I can't get into my iPod, I can't provide a list of tweaks. I would if I could, but it just can't happen unless I can get in there. Thank you very much! Please don't feel afraid to reply, I REALLY need the help!
Thanks!
I'm using zsh with prezto as my shell with iTerm as terminal app.
I always get the message "You have new mail" when opening a new prompt. I don't have any new mail in Mac Mail and I don't run a mail server.
How can I get rid of this message?
Thanks
I have a problem with my Safari. I can not install any extensions. Whenever I install one they work fine, but the next time I open Safari, the extension is not there. So I have to reinstall them at every launch.
I have tried to clear my Safari stuff, like plists and Library folders. Im using Safari 8.0.1.
I use iMessage/SMS on my Mac linked from my iPhone, I have been having issues with it on my Mac lately with the unread count being incorrect.
It says that there is a message unread when its been read on both my phone itself and my Mac. I have even deleted the conversation from my Mac but the count is still there.
It seems to be from the SMS messages I receive, I have tried enabling and disabling iMessage on Mac but that did not fix it.
(I have the latest versions of Mac OSX and iOS installed)
Basically, I do a lot of C programming (for class) so I use gcc a lot on my mac. Recently since two days, whenever I ran it, the entire computer is getting frozen, and a force restart is necessary to get it working again.
So I suspected what might be the error, so I ran disk-utility and checked Yosemite partition for errors. Apparently there are a lot of errors, so I booted into single user mode, and ran the following commands.
$ fsck -fy
$ fsck -fy
$ reboot
Upon reboot, my disk is now repaired, but the computer still froze when I ran gcc So this time, I ran a permissions verification in the disk utility. It said the following.
Verifying permissions for “Yosemite”
Open error 22: “Invalid argument” on usr/bin/gatherheaderdoc
Open error 22: “Invalid argument” on usr/bin/gcc
Open error 22: “Invalid argument” on usr/bin/gcov
Open error 22: “Invalid argument” on usr/bin/git
I tried to repair the permissions, but these persist. I even tried repairing the permissions multiple times, even from RecoveryHD and also from single user mode, but these errors persist.
What do these mean? What should I do to fix it?
Edit:
Here's the output of ls -l usr/bin/gcc
Harshas-Mac-Pro:~ sriharshachilakapati$ ls -l /usr/bin/gcc
-rwxr-xr-x 1 root wheel 14160 Sep 27 07:36 /usr/bin/gcc
Harshas-Mac-Pro:~ sriharshachilakapati$
Edit:
My partition is again damaged. This is the output after I just repaired it from single-user mode.
Verifying volume “Yosemite”
Verifying file system.
Using live mode.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking catalog hierarchy.
(It should be 337485 instead of 337484)
Volume bitmap needs minor repair for under-allocation
Checking volume information.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
The volume Yosemite was found corrupt and needs to be repaired.
File system check exit code is 8.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
This occurred just after I had repaired my partition from single user mode. Why?
Some programs take some time to open in OS X on a stressed older machine with a spinning hard disk. This is fine and understandable.
I would appreciate so much if someone would teach me how to instruct a programs that I launch to do so in the background?
Example: Suppose I am typing a Note, then I click Email to begin its launch and switch focus back to Notes and resume typing. I will be able to type for at least five but often upwards of 20 seconds, and at some unpredictable moment my typing will not show up on my Note but instead begin executing commands to whichever Mail window happens to be the last one I used last time.
How can I prevent loading applications from stealing focus after they are finished loading?
Any version of OS X, namely 10.9 and 10.10.
I have a MacBook Pro with Retina Display (early 2013) running OS X 10.10.1, but this issue has occured as early as the opt-in beta releases of 10.10. I have done fresh reinstalls several times.
After running for some time, (last time this issue occurred I had just about four days of uptime,) the system will completely hang. I hear a repeated sample of whatever music/audio was playing (if any), and after a few moments the computer shuts itself off.
When restarting, during the first boot the system will suddenly reboot with about 1/4 progress on the boot progress indicator. The second boot succeeds.
After restarting, the syslog shows nothing unusual, just normal output suddenly followed by the usual startup output (and nothing about the first failed reboot mentioned before).
How can I diagnose and potentially fix this issue?
Whats up folks, i have posted this question on other forums but got no reply, just note before you read, my terminology is not the greatest, im only studying IT this year, so my knowledge be still a bit lame, so im not yet use to using the Shell yet but im getting there. :)
The problem that im having right now is that i cant run "-vm" path in Terminal.
So im running Java in Eclipse (Programming) the last few days, just started, wanted to get into it. everything is going fine i make a few mistakes get a few errors, delete them bla bla, so i decided to restart my computer, All of a Sudden java wont launch, it just bounces in the Dock bar then disappears without any message. so i did the usual, deleted Eclipse and Java then reinstalled both of them, and as you imagined that didn't help. Opened up terminal to check the path and it saids "-vm is not a command" or something like that, then i tried "-bash" and get the same thing, from i researched, i found similar problems with Snow Leopard with people. So far as i seen on this site everyone who had the same problem got it sorted, and being that this is a very individual problem, every answer is different.
I think the problem is caused either by when i was deleting stuff in eclipse i could of deleted something important, or i also just installed wine, and it was after i closed Wine this happened plus a similar problem a user had like this was also connected to him installing wine
TL;DR eclipse wont launch, "-VM" is no longer commands (-VM is the pathway for Eclipse) So anybody got any ideas? this is on Snow Leopard
When i "echo $PATH" i get this
usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
From what i think i might have to do by researching is create a Bash file in my Home folder as non exist, but i wouldn't know what to paste in there. Thanks in advance
P.S. here is what im getting when i try to run Eclipse .
/Applications/http://Eclipse.app/Contents/MacOS/eclipse ; exit; Luke:~ lukekearns$ /Applications/http://Eclipse.app/Contents/MacOS/eclipse ; exit; Bus error logout
[Process completed]
For some reason looking for an macport package what containing an specific file, in this case looking for the file:
sapi/embed/php_embed.h (probably should be somewhere in the `/opt/local/include/...`)
and some php package should contains it.
I have installed the php55 macport but it doesn't contains the above file.
Unfortunately the port contents portname show only the content of already installed packages.
Is possible to show (or find somewhere) what files containing some macport packages without installing them - e.g. how to find what package i need to install to get the sapi/embed/php_embed.h file?
I just got my new Macbook Pro Retina and update it to Yosemite. I now want to recover/get some files from my Time Machine backup of my previous Macbook but don't want to migrate my whole Time machine onto my new Mac. So for example I want some folders from my Documents folder of my older Mac, but not the whole folder. And some specific Apps/Programs and not all of them.
Thanks in advance!
I just bought a new Mac , i started to make few partitions as i used to do in the past.
I noticed i am not able to have more than two partition :( It says : "you may only split this partition into two"
What is the reason and where is the source of this limitation?
Is that because of Core Storage? If i revert it back using diskutil command, will it solve my issue?
I would like to have 4 partitions, any suggestion please?
When I am running brew doctor I am getting the following list of errors. Is there any way I can eliminate these error reports? Thank you.
Please note that these warnings are just used to help the Homebrew maintainers
with debugging if you file an issue. If everything you use Homebrew for is
working fine: please don't worry and just ignore them. Thanks!
Warning: Unbrewed header files were found in /usr/local/include.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected header files:
/usr/local/include/c-client.h
/usr/local/include/dummy.h
/usr/local/include/env.h
/usr/local/include/env_unix.h
/usr/local/include/fdstring.h
/usr/local/include/flockcyg.h
/usr/local/include/flocksim.h
/usr/local/include/flstring.h
/usr/local/include/fs.h
/usr/local/include/ftl.h
/usr/local/include/imap4r1.h
/usr/local/include/layout/LayoutEngine.h
/usr/local/include/layout/LEFontInstance.h
/usr/local/include/layout/LEGlyphFilter.h
/usr/local/include/layout/LEGlyphStorage.h
/usr/local/include/layout/LEInsertionList.h
/usr/local/include/layout/LELanguages.h
/usr/local/include/layout/LEScripts.h
/usr/local/include/layout/LESwaps.h
/usr/local/include/layout/LETypes.h
/usr/local/include/layout/loengine.h
/usr/local/include/layout/ParagraphLayout.h
/usr/local/include/layout/playout.h
/usr/local/include/layout/plruns.h
/usr/local/include/layout/RunArrays.h
/usr/local/include/linkage.h
/usr/local/include/mail.h
/usr/local/include/mcrypt.h
/usr/local/include/misc.h
/usr/local/include/netmsg.h
/usr/local/include/newsrc.h
/usr/local/include/nl.h
/usr/local/include/nntp.h
/usr/local/include/node/eio-emul.h
/usr/local/include/node/ev-emul.h
/usr/local/include/node/uv-private/eio.h
/usr/local/include/node/uv-private/ev.h
/usr/local/include/os_a32.h
/usr/local/include/os_a41.h
/usr/local/include/os_a52.h
/usr/local/include/os_aix.h
/usr/local/include/os_aos.h
/usr/local/include/os_art.h
/usr/local/include/os_asv.h
/usr/local/include/os_aux.h
/usr/local/include/os_bsd.h
/usr/local/include/os_bsf.h
/usr/local/include/os_bsi.h
/usr/local/include/os_cvx.h
/usr/local/include/os_cyg.h
/usr/local/include/os_d-g.h
/usr/local/include/os_do4.h
/usr/local/include/os_drs.h
/usr/local/include/os_dyn.h
/usr/local/include/os_hpp.h
/usr/local/include/os_isc.h
/usr/local/include/os_lnx.h
/usr/local/include/os_lyn.h
/usr/local/include/os_mct.h
/usr/local/include/os_mnt.h
/usr/local/include/os_nto.h
/usr/local/include/os_nxt.h
/usr/local/include/os_os4.h
/usr/local/include/os_osf.h
/usr/local/include/os_osx.h
/usr/local/include/os_ptx.h
/usr/local/include/os_pyr.h
/usr/local/include/os_qnx.h
/usr/local/include/os_s40.h
/usr/local/include/os_sc5.h
/usr/local/include/os_sco.h
/usr/local/include/os_sgi.h
/usr/local/include/os_shp.h
/usr/local/include/os_slx.h
/usr/local/include/os_soln.h
/usr/local/include/os_solo.h
/usr/local/include/os_sos.h
/usr/local/include/os_sua.h
/usr/local/include/os_sun.h
/usr/local/include/os_sv2.h
/usr/local/include/os_sv4.h
/usr/local/include/os_ult.h
/usr/local/include/os_vu2.h
/usr/local/include/osdep.h
/usr/local/include/php/ext/hash/php_hash_types.h
/usr/local/include/php/main/logos.h
/usr/local/include/php/main/php_logos.h
/usr/local/include/php/TSRM/tsrm_virtual_cwd.h
/usr/local/include/pseudo.h
/usr/local/include/rfc822.h
/usr/local/include/smtp.h
/usr/local/include/sslio.h
/usr/local/include/tcp.h
/usr/local/include/tcp_unix.h
/usr/local/include/unicode/alphaindex.h
/usr/local/include/unicode/appendable.h
/usr/local/include/unicode/basictz.h
/usr/local/include/unicode/bms.h
/usr/local/include/unicode/bmsearch.h
/usr/local/include/unicode/brkiter.h
/usr/local/include/unicode/bytestream.h
/usr/local/include/unicode/bytestrie.h
/usr/local/include/unicode/bytestriebuilder.h
/usr/local/include/unicode/calendar.h
/usr/local/include/unicode/caniter.h
/usr/local/include/unicode/chariter.h
/usr/local/include/unicode/choicfmt.h
/usr/local/include/unicode/coleitr.h
/usr/local/include/unicode/coll.h
/usr/local/include/unicode/colldata.h
/usr/local/include/unicode/curramt.h
/usr/local/include/unicode/currpinf.h
/usr/local/include/unicode/currunit.h
/usr/local/include/unicode/datefmt.h
/usr/local/include/unicode/dbbi.h
/usr/local/include/unicode/dcfmtsym.h
/usr/local/include/unicode/decimfmt.h
/usr/local/include/unicode/docmain.h
/usr/local/include/unicode/dtfmtsym.h
/usr/local/include/unicode/dtintrv.h
/usr/local/include/unicode/dtitvfmt.h
/usr/local/include/unicode/dtitvinf.h
/usr/local/include/unicode/dtptngen.h
/usr/local/include/unicode/dtrule.h
/usr/local/include/unicode/errorcode.h
/usr/local/include/unicode/fieldpos.h
/usr/local/include/unicode/fmtable.h
/usr/local/include/unicode/format.h
/usr/local/include/unicode/fpositer.h
/usr/local/include/unicode/gregocal.h
/usr/local/include/unicode/icudataver.h
/usr/local/include/unicode/icuplug.h
/usr/local/include/unicode/idna.h
/usr/local/include/unicode/localpointer.h
/usr/local/include/unicode/locdspnm.h
/usr/local/include/unicode/locid.h
/usr/local/include/unicode/measfmt.h
/usr/local/include/unicode/measunit.h
/usr/local/include/unicode/measure.h
/usr/local/include/unicode/messagepattern.h
/usr/local/include/unicode/msgfmt.h
/usr/local/include/unicode/normalizer2.h
/usr/local/include/unicode/normlzr.h
/usr/local/include/unicode/numfmt.h
/usr/local/include/unicode/numsys.h
/usr/local/include/unicode/parseerr.h
/usr/local/include/unicode/parsepos.h
/usr/local/include/unicode/platform.h
/usr/local/include/unicode/plurfmt.h
/usr/local/include/unicode/plurrule.h
/usr/local/include/unicode/ptypes.h
/usr/local/include/unicode/putil.h
/usr/local/include/unicode/rbbi.h
/usr/local/include/unicode/rbnf.h
/usr/local/include/unicode/rbtz.h
/usr/local/include/unicode/regex.h
/usr/local/include/unicode/rep.h
/usr/local/include/unicode/resbund.h
/usr/local/include/unicode/schriter.h
/usr/local/include/unicode/search.h
/usr/local/include/unicode/selfmt.h
/usr/local/include/unicode/simpletz.h
/usr/local/include/unicode/smpdtfmt.h
/usr/local/include/unicode/sortkey.h
/usr/local/include/unicode/std_string.h
/usr/local/include/unicode/strenum.h
/usr/local/include/unicode/stringpiece.h
/usr/local/include/unicode/stringtriebuilder.h
/usr/local/include/unicode/stsearch.h
/usr/local/include/unicode/symtable.h
/usr/local/include/unicode/tblcoll.h
/usr/local/include/unicode/timezone.h
/usr/local/include/unicode/tmunit.h
/usr/local/include/unicode/tmutamt.h
/usr/local/include/unicode/tmutfmt.h
/usr/local/include/unicode/translit.h
/usr/local/include/unicode/tzfmt.h
/usr/local/include/unicode/tznames.h
/usr/local/include/unicode/tzrule.h
/usr/local/include/unicode/tztrans.h
/usr/local/include/unicode/ubidi.h
/usr/local/include/unicode/ubrk.h
/usr/local/include/unicode/ucal.h
/usr/local/include/unicode/ucasemap.h
/usr/local/include/unicode/ucat.h
/usr/local/include/unicode/uchar.h
/usr/local/include/unicode/ucharstrie.h
/usr/local/include/unicode/ucharstriebuilder.h
/usr/local/include/unicode/uchriter.h
/usr/local/include/unicode/uclean.h
/usr/local/include/unicode/ucnv.h
/usr/local/include/unicode/ucnv_cb.h
/usr/local/include/unicode/ucnv_err.h
/usr/local/include/unicode/ucnvsel.h
/usr/local/include/unicode/ucol.h
/usr/local/include/unicode/ucoleitr.h
/usr/local/include/unicode/uconfig.h
/usr/local/include/unicode/ucsdet.h
/usr/local/include/unicode/ucurr.h
/usr/local/include/unicode/udat.h
/usr/local/include/unicode/udata.h
/usr/local/include/unicode/udateintervalformat.h
/usr/local/include/unicode/udatpg.h
/usr/local/include/unicode/uenum.h
/usr/local/include/unicode/uidna.h
/usr/local/include/unicode/uiter.h
/usr/local/include/unicode/uldnames.h
/usr/local/include/unicode/uloc.h
/usr/local/include/unicode/ulocdata.h
/usr/local/include/unicode/umachine.h
/usr/local/include/unicode/umisc.h
/usr/local/include/unicode/umsg.h
/usr/local/include/unicode/unifilt.h
/usr/local/include/unicode/unifunct.h
/usr/local/include/unicode/unimatch.h
/usr/local/include/unicode/unirepl.h
/usr/local/include/unicode/uniset.h
/usr/local/include/unicode/unistr.h
/usr/local/include/unicode/unorm.h
/usr/local/include/unicode/unorm2.h
/usr/local/include/unicode/unum.h
/usr/local/include/unicode/uobject.h
/usr/local/include/unicode/upluralrules.h
/usr/local/include/unicode/uregex.h
/usr/local/include/unicode/urename.h
/usr/local/include/unicode/urep.h
/usr/local/include/unicode/ures.h
/usr/local/include/unicode/uscript.h
/usr/local/include/unicode/usearch.h
/usr/local/include/unicode/uset.h
/usr/local/include/unicode/usetiter.h
/usr/local/include/unicode/ushape.h
/usr/local/include/unicode/uspoof.h
/usr/local/include/unicode/usprep.h
/usr/local/include/unicode/ustdio.h
/usr/local/include/unicode/ustream.h
/usr/local/include/unicode/ustring.h
/usr/local/include/unicode/ustringtrie.h
/usr/local/include/unicode/utext.h
/usr/local/include/unicode/utf.h
/usr/local/include/unicode/utf16.h
/usr/local/include/unicode/utf32.h
/usr/local/include/unicode/utf8.h
/usr/local/include/unicode/utf_old.h
/usr/local/include/unicode/utmscale.h
/usr/local/include/unicode/utrace.h
/usr/local/include/unicode/utrans.h
/usr/local/include/unicode/utypes.h
/usr/local/include/unicode/uvernum.h
/usr/local/include/unicode/uversion.h
/usr/local/include/unicode/vtzone.h
/usr/local/include/unix.h
/usr/local/include/utf8.h
/usr/local/include/utf8aux.h
How does it is possible if there are only few open apps? o.O
I upgraded from Mac OS Mavericks 10.9.5 to Mac OS Yosemite 10.10.1 and have issues with Mac App Store.
If I search for an item, I get results, but if I click a result, I get a blank page, whatever the app's page I want to see.
As you can see, the classic app background doesn't even appear.
I do not experience this issue on a fresh install of Yosemite in another mac, so I did bought my app on the other mac and used the search results's menu to install it on the right one, but that's quite tricky.
I tried to reboot, to reset the PRAM and other stuffs I seen over the internet, but didn't found any good answer.
FYI:
I'm trying to get Mail.app on OS X Yosemite to autocomplete contacts on my Gmail "Other" group - i.e. the contacts google creates for you once you've sent them an email.
I have a Google "Internet Account" setup in OS X, which syncs Google's contacts, but only the ones in my Gmail "Address Book", which does not include the earlier "Other".
If I try to set up a CarDav account in Contacts with my gmail credentials it tells me it's a duplicate, and if I try to add some extra dots to my email, it will create my account, but immediately turn it into a Google account as opposed to a CarDav.
I would ideally like to achieve a similar setup on iOS, having the Gmail "Other" available for autocomplete on iOS Mail
Any pointers would be greatly appreciated
I have an iPhone 4S, and I am thinking about upgrading to an iPhone 5S. I know that the iPhone 5S has the new Lightning connector, so I will have to get new cables. But what about the USB power adapter? Can I use the iPhone 4S USB power adapter with the iPhone 5S?
I found an Apple page that discusses their iPhone 4S USB power adapter, and they do not mention the iPhone 5S, so I'm not sure if it is compatible with the iPhone 5S:
I want to play songs on my Apple TV from my iPhone5 running 8.1. After about three songs, it stops playing (tested three times). Is there any possible explanation for this?
My question is: Why does my iPhone5 playing songs through my Apple TV times out after three songs?
I'm using a MACBOOK Pro and VMWARE fusion latest version. 40% of the time the VM runs ok, but frequently it just grinds to a halt and is barely useable.
I am running Yosemite. I am about to buy a new iMAC 5k and i'm concerned that if I do its going to still be temperamental and run slow
I do windows programming and need the VM for work. My other option is to buy a windows machine and run the VM using VMWARE workstation
But I really want the new MAC, but would likely break down in tears if it performed like I have now 2.9GHz intel Core i7
Please advise, anyone out there have it running trouble free?
I need help.I carn't get facebook nessabver on my Iphone 3gs.WHen I reset my phone I made a new account.Now it just says i need IOS 7.What should i do
